Australia Door Frame Making Machine
Basic Info
Model No.: XF 62*153 Door Frame Roll Forming Machine
Product Description
This is also a stock Door Frame Forming Machine in our factory. door frame making machine. We can supply you this machine with low price. The door frame machine is designed according to customers' requirement. One machine can produce same profile but different sizes. It saves lots of cost, and get customers great satisfactions. So if you are interested in it, please don't hesitate to contact me. shutter doors and windows roll forming machinery.
1. Parameters of Shutter Door Frame Machine
1
| Suitable Material | Colored Steel plate, Galvanized Board,Aluminum Plate |
2
| Width of the raw material | 305 mm |
3 | Rows of rollers | 20 Rows |
4 | Appearance size | 9400*1350*1510 mm |
5 | Total power
| 5.5+5.5 KW |
6 | Thickness of raw material | 0.8-1.2 mm |
7 | Productivity | 8-10 m/min |
8 | Diameter of shaft | ¢80 mm |
9 | Voltage | 380 V 50 Hz 3 phases |
2.Components And Technical Specification of Rolling Shutter Door Frame Forming Machine
Manual Uncoiler
Usage: It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. Loading capacity: 3T
Inner diameter: 500-508 mm
Main Roll Forming Machine
Bearing steel, The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped.
Shearing Mechanism
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Material of blades: Cr12, quenching treatment
Hydraulic System & Computer Control Cabinet
Hydraulic oil: 40#
hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use
Output Table
It adopts welded steel and supported roller to transmit the products, which is used to collect the finished products.
3. Packing Method
Main machine is nude,the computer control box is packed by carton box
4. Transportation
All machines need one 40 feet container to hold
5. Payment Term
30% deposit by T/T in advance and 70% balance after inspection confirmation before shipment
6.Delivery Time
Within 30 days after receiving deposit
7. Warranty:
One year,and we will provide technical support for wholelife of the equipment.
Service:
1. One year guarantee for whole machine.
2. 24 hours technical support by email or calling
3. If there is any problem found of the machine, we will repair it for free in one year.
1.We have professional technicians for loading
Guaranteed the goods load into container without any damage.
2. Transportation : Machines need one 40 feet container to hold
3.Please provide us the nearest port name, we will ask shipping cost and arrange shipping for you.
Product Categories : Shutter Doors And Windows Roll Forming Machinery